EN
31
EN
In
more
detail...
TTB888SDR
Troubleshooting
Troubleshooting
Therefore check the product using this section. In most cases the problem can
be solved quickly.
WARNING!
Only perform the steps described within these instructions!
All further inspection, maintenance and repair work must be performed
cannot solve the problem yourself!
Problem
Possible cause
Solution
1. Product does not
start
1.1. Not connected to
power supply
1.2. Power cord or plug is
defective
1.3. Other electrical defect
to the product
1.1. Connect to power
supply
1.2. Check by a
specialist electrician
1.3. Check by a
specialist electrician
2. Product does not
reach full power
2.1. Extension cord not
suitable for operation
with this product
2.2. Power source (e. g.
generator) has too
low voltage
2.3. Air vents are blocked
2.1. Use a proper
extension cord
2.2. Connect to another
power source
2.3. Clean the air vents
3. Unsatisfactory
result
3.1. Saw blade is dull/
damaged
3.2. Saw blade not
suitable for workpiece
material
3.1. Replace with new
one
3.2. Use proper saw
blade
4. Excessive
vibration /noise or
exhaust
4.1. Saw blade is dull/
damaged
4.2. Bolts/nuts are loose
4.1. Replace with a new
one
4.2. Tighten bolts/nuts
MNL_300W Random Orbit Sander_MROS300_IMGB_V1_211231.indd 31
12/31/21 11:46 AM
