4
STEP 1: INSTALLING CORNER FRAMES
1.
Rest
CORNER FRAME-1 (4)
on the left/front corner of the
BASE ASSY (1)
and align bolt
holes. Insert
CARRIAGE BOLT M10x60 (20)
through the holes from the side and place
FLAT
WASHER M10 (21)
,
SPRING WASHER M10 (22)
and
HEX NUT M10 (23)
onto the end of the
bolt. Then insert
CARRIAGE BOLT M10x80 (18)
through the bolt holes from the top and
place
FLAT WASHER M10 (21)
,
SPRING WASHER M10 (22)
and
HEX NUT M10 (23)
onto the
end of the bolt.
FASTEN BUT DO NOT TIGHTEN HARDWARE.
2.
Repeat the above procedures for mounting the second
CORNER FRAME-1 (4)
on the
right/back diagonal corner of the
BASE ASSY (1)
.
3.
Rest
CORNER FRAME-1 (5)
on the right/front corner of the
BASE ASSY (1)
and align bolt
holes. Insert
CARRIAGE BOLT M10x60 (20)
through the holes from the side and place
FLAT
WASHER M10 (21)
, SPRING
WASHER M10 (22)
and
HEX NUT M10 (23)
onto the end of the
bolt. Then insert
CARRIAGE BOLT M10x80 (18)
through the bolt holes from the top and
place
FLAT WASHER M10 (21)
,
SPRING WASHER M10 (22)
and
HEX NUT M10 (23)
onto the
end of the bolt. Fasten but do not tighten hardware.
4.
Repeat the above procedures for mounting the second
CORNER FRAME-1 (5)
on the
left/back diagonal corner of the
BASE ASSY (1)
.
