5
For the next two steps, it is recommended that one person holds the parts while another installs
the hardware.
5.
Stand each
UPRIGHT POLE (1)
between a pair of center
GUSSET PLATES (5)
, and secure them with
the following hardware:
M16x120 HEX BOLTS (8)
,
M16 FLAT WASHERS (9)
,
M16 SPRING
WASHERS (10)
, and
M16 HEX NUTS (11)
.
6.
Secure the
PULL-UP BAR (6)
to the
UPRIGHT POLES (1)
with the following hardware:
M16x110
HEX BOLTS (12)
,
M16 FLAT WASHERS (9)
,
M16 SPRING WASHERS (10)
, and
M16 HEX NUTS (11)
.
7.
Install the
HD J-HOOKS (4)
.
