4
A S S E M B L Y I N S T R U C T I O N S
-
IMPORTANT:
•
Before assembly, it is recommended to
create distinct areas for each box’s contents and
organize the parts and hardware.
•
During assembling, make sure to loosely hand-tighten all nut-and-bolt combinations.
•
Once assembly is finished, tighten all nut-and-bolt combinations to stabilize the product.
1.
Lay out both
SIDE LEGS (2)
and the
BACK BOTTOM BRACE (3)
on a flat surface as seen above.
2.
As indicated by the blue lines in the image above, place one
GUSSET PLATE (14)
on each outside
end of the
SIDE LEGS (2)
where the
BACK BOTTOM BRACE (3)
is located, and secure the
GUSSET
PLATES (14)
,
SIDE LEGS (2)
, and
BACK BOTTOM BRACE (3)
together with the following hardware:
M16x120 HEX BOLTS (8)
,
M16 FLAT WASHERS (9)
,
M16 SPRING WASHERS (10)
, and
M16 HEX
NUTS (11)
.
3.
Secure one
GUSSET PLATE (5)
to each center side of the
SIDE LEGS (2)
with the following
hardware:
M16x120 HEX BOLTS (8)
,
M16 FLAT WASHERS (9)
,
M16 SPRING WASHERS (10)
, and
M16 HEX NUTS (11)
.
4.
Insert a
SQUARE TUBE CAP (7)
into each end of the
SIDE LEGS (2)
.
