pg
17
tisira |
www.tisira.com
maInTaInInG
YOUr OVen
GENERAL MAINTENANCE
Ensure that the power to the unit is switched off prior to cleaning the unit. Surface should only be
cleaned with warm soapy water and a soft non abrasive cloth. In coastal environments and humid
areas more frequent cleaning is required to maintain the finish.
To extend the life of your oven, it must be cleaned frequently, keeping in mind that:
Do not use steam equipment to clean the appliance.
To protect against the risk of electrical shock, do not immerse the unit, cord or plug in water
or other liquid or sprinkle water to clean the appliance!
Don’t clean the appliance when it is hot! The inside and external surface of the oven should
preferably be cleaned by damp cloth when it is cooled down. Wash all accessories in hot soapy
water, wipe dry with a paper or cloth towel.
If you use your oven for an extended period of time, condensation may form. Dry it using a soft
cloth.
There is a rubber seal surrounding the oven opening, which guarantees its perfect functioning.
Check the condition of this seal on a regular basis. If necessary, clean it and avoid using
abrasive products or objects to do so. Should it become damaged, please contact your nearest
service centre. We recommend you avoid using the oven until it has been repaired.
Never line the oven bottom with aluminum foil, as the consequent accumulation of heat could
compromise the cooking and even damage the enamel.
Clean the glass door using damp cloth and dry it with a soft cloth.
Do not use harsh abrasive cleaners or sharp metal scrapers to clean the oven door glass
since they can scratch the surface, which may result in shattering of the glass.
DOOR REMOVAL
Your oven is fitted with a removable door. To
remove the door open the door fully, engage
the doorstop [B] on the left and right hinge.
[A] Carefully start to close the door, the door
will start to release from the hinge supports
the door can be then removed. When re-
installing the door ensure the hinges are
slid into their slots (C) fully engages in the
base of the hinge support.
A
C
B
A
C
B
