TIPTEL 40 VoIP, Инструкция по установке и эксплуатации

Страница: 13 / 40

Network Configuration
13
•
Once you hear a positive audio signal, hang up.
•
Lift the telephone receiver.
•
If the sub-network mask has to be changed, proceed accordingly.
Enter

and then the sub-network mask in the format
nnn

nnn

nnn

nnn

.
Example: 255.255.255.0:

.
Note: After changing the setting, the tiptel 40 VoIP confirms the successful
input with an affirmative audio signal. Applying the change generally
takes about 30-60 seconds.
This concludes initial configuration.
Overview of programming codes
Data Code Input data Notes
Display IP
address

none
IP address is
displayed on the
ISDN telephone
Enter IP
address

nnn*nnn*nnn*nnn#
Input is confirmed
acoustically
Display net
mask

none
Network mask
displayed on ISDN
telephone
Enter
network
mask

nnn*nnn*nnn*nnn#
Input is confirmed
acoustically
Reset to
factory
settings

none
The device is reset to
the state in which it
was delivered
Note: Your ISDN telephone must be able to show DISPLAY notifications in
order to display the IP address or sub-network mask.