EN
18
Brush Roller Self-cleaning
1. Place the appliance on the charging base after use, the
sensor will auto-detect the level of dirt.
2. Press the self-cleaning button and you can select the
Quick Self-cleaning (takes 2 minutes) or Super Self-
cleaning (takes 6 minutes) to begin the process.
3. Once complete, please clean the Dirty Water Tank.
And the appliance will begin charging.
Note:
• Ensure the charging base is plugged in and the battery
level is >10%.
• Before self-cleaning cycle, please clean the DWT and
ensure the water level in the CWT exceeds 40%.
Brush Roller Cover
②
①
Squeeze latches on the cover and pull upward to
remove.
Rinse with water.
When replacing, always latch the brush cover into
place to avoid leakage.
click
