ECO 20 Automatic Regulation of Burning
15
•
Try press START button. If the sensor problem has resolved itself, a new burn cycle should
continue normally without the need for you to do anything. If it does not, check the
thermal sensor for bad wiring and / or damage.
11
GENERAL NOTICES
•
This Manual is an integral part of your purchase; we recommend storing it near the device so
as to have it available for reference when needed.
•
The device is not designed for any use other than those described in the User and Service
Manuals.
•
The operator should regularly visually check the condition of the device and provide basic care
and maintenance.
•
Do not expose the control unit to temperatures over 50 Celsius, contact with water or
excessive humidity. Only use the unit within its operating parameters. Do not expose the unit
to a combination of high humidity and large temperature swings, which may cause water vapor
to condense inside and damage the unit.
•
Disconnect all electrical connections before performing any maintenance on the device!
•
In the event of malfunction, please return the device to the distributor, along with a detailed
description of the problem.
12
TECHNICAL DATA
•
Control unit input power
5V/DC,
50Hz 0,3A
•
Control unit heat resistance
max 50°C
•
Temperature sensor heat resistance
iron part
max 700 °C
•
Type of temperature sensor T1
thermocouple
–
type K
•
Typ teplotního čidla T2
resistance sensor
–
type PTC
•
Disposal method
dispose of as separate waste
•
Cable attachment method
konektorové zapojení
•
Control unit IP
IP 40
•
Software class
A (control functions do not affect device safety)
