User Manual-MA2T
Version A August 2021
13 of 25
13
Wiring definition
The optional MA2T T-Smart system is integrated with the T-Smart PBCA and MCU. All the functionality can be
achieved with proper configuration on PGMA. Please refer to the following table that describes the primary
(but not limited) system, implying the required system and the relative connections for each pin, signal spec,
and warnings.
Below is the standard wiring definition of the actuator. If your actuator is ordered with customized wiring,
please contact TiMOTION’s sales representatives for more detailed information.
In general, the MA2T T-Smart version cable exit can have a maximum of 3 sets with 8 pins, 6 pins, and 2 pins.
(2 power wire pins and/or up to 8 signal wire pins and/or up to 6 PGMA & Reed signal wire pins.)
Function
Connection description
T-Smart
Stable DC power supply
Signal type switch to control actuator extended or retracted
Position Signal or EOS Signal output to control box or PLC
Reed switch signal output to control box or PLC
Synchronized up to 8 actuators
Note: Please contact your TiMOTION sales representative if the signal outputs are customized.
