Use and Maintenance
UM-18
Removal and replacement of the Y-axis carriages
Removal and replacement of the Z-axis carriages
If replacing one or more carriages, it is recommended that the
utmost care is taken when handling the axes and remember
that is essential to work on one slider at a time.
a.
Use any support to lock the plate.
b.
Remove elements that hold the roller or the carriage on the
base plate (refer to the section dedicated to the type of
carriages or rollers on the axis).
c.
Remove the carriage or the V-roller to be replaced.
d.
Perform the operation in reverse for refitting the cart.
e.
Check the preload setting of carriages (refer to the
section dedicated to thetype of carriages or rollers on the
axis).
a.
Use any support to lock the vertical profile.
b.
Remove the elements that fix the carriage or roller on the base
plate (refer to the section dedicated to type of carriages or
rollers on the axis).
c.
Remove the carriage or the roller to be replaced.
d.
Perform the operation in reverse for refitting the carriage and
check the setting of the preloading of carriages (refer to the
section dedicated to the type of carriages or rollers on the
axis).
PAR: carriage, sliders and guides replacement
