Timken ROLLON SC 100, Использование и обслуживание

Страница: 7 / 18

UM-5
Smart System
N
11) Re-assembly the belt clamp plate without completely fixing
the screws.
Re-assembly the upper plate at the end of the profile.
Tension the belt by acting on the tensioning screw, when
the tension is reached tight the set-screw and then tight all
the screws blocking the belt and the ones blocking the belt
tension plate.
8) Insert the new belt inside the driving head taking care about
the orientation of the teeth which must engage with the dri-
ving pulley (see Fig. 15).
9) Re-assembly the driving head plate (see Fig. 16).
10) Place the new belt on the lower belt clamp (see Fig. 17).
Re-assembly the belt clamp plate.
Re-assembly the lower plate, take care about the reference
step.
Fig. 15
Fig. 17
Fig. 16
Fig. 18