Timken ROLLON SC 100, Использование и обслуживание

Страница: 13 / 18

UM-11
Smart System
Warnings and legal notes
Before incorporating the partly completed machinery,
we recommend consulting this chapter carefully, in
addition to the assembly manual supplied with the
individual modules. The information contained in
this chapter and in the manuals for the individual
modules, is provided by highly qualified and certified
personnel, possessing adequate competence in in-
corporating the partly completed machinery.
Avoid damage. Do not operate with inadequate tools
Precaution in installation and handling operations.
Significantly heavy equipment.
When handling the axis or system of axes, always
make sure that the support or anchoring surfaces do
not leave room for bending.
In order to stabilize the axis or system of axes, before
handling it is mandatory to securely block the mobile
parts. When moving axes with vertical translation (Z
AXES) or combination systems (horizontal X and/or
more than one vertical Z), it is mandatory to use the
vertical movement to put all of the axes at the corre-
sponding lower limit switch.
Warning: moving parts. Do not leave objectson the axis
Do not overload. Do not subject to torsion stress.
Do not leave exposed to atmospheric agents.
Special installations: check the depth of the threads
on moving elements
Make sure that the system has been installed on a
level floor surface.
In use, accurately comply with the specific perfor-
mance values declared in the catalog or, in particular
cases, the load and dynamic performance character-
istics requested in the phase prior to design.
Before mounting the motor on the gearbox, it is ad-
visable to perform a pre-test of the motor itself, with-
out connection to the gear unit. The testing of this
component was not carried out by the manufacturer
of the machine. It will therefore be the responsibility
of the customer of Rollon to perform the testing of
the same, in order to verify its correct operation.
For modules or parts of modular systems with ver-
tical movement (Z axis), it is mandatory to mount
self-braking motors to neutralize the risk of the axis
dropping.
The images in this manual are to be considered
merely an indication and not binding; therefore, the
supply received could be different from the imag-
es contained in this manual, and Rollon S.p.A has
deemed it useful to insert only one example.
Systems supplied by Rollon S.p.A. were not de-
signed/envisaged to operate in ATEX environments.
The manufacturer cannot be considered responsible
for any consequences derived from improper use or
any use other than the purpose the axis or system
of axes was designed for, or derived from failure to
comply, during incorporation phases, with the rules
of Good Technique and with what is indicated in this
manual.