Timex Ironman Global Trainer M229 Скачать руководство пользователя

Страница: 41 / 42

FLEX TECH are trademarks of Timex Group B.V. and its subsidiaries. IRONMAN and M-DOT are registered

trademarks of World Triathlon Corporation. SiRF and SiRF LOGO are registered trademarks of SiRF Technology,

Inc. SiRFstarIII is a trademark of SiRF Technology, Inc. ANT+ amd ANT+ Logo are trademarks of Dynastream

Innovations, Inc. WINDOWS is a registered trademarks of Microsoft Corporation in the U.S. and other countries.

FCC Notice (U.S.) / IC Notice (Canada):

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) this device may not cause harmful interference, and (2) this device must accept any interference received,

including interference that may cause undesired operation.

Warning:

Changes or modifications to this unit not expressly approved by the party responsible for

compliance could void the user’s authority to operate the equipment.

NOTE:

This equipment has been tested and found to comply with the limits for a Class B digital device,

pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against

harmful interference in a residential installation. This equipment generates, uses, and can radiate radio

frequency energy and, if not installed and used in accordance with the instructions, may cause harmful

interference to radio communications. However, there is no guarantee that interference will not occur in

a particular installation. If this equipment does cause harmful interference to radio or television reception,

which can be determined by turning the equipment off and on, the user is encouraged to try to correct the

interference by one or more of the following measures:

— Reorient or relocate the receiving antenna.

— Increase the separation between the equipment and receiver.

— Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

— Consult the dealer or an experienced radio TV technician for help.

This Class [B] digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe [B] est

conforme à la norme NMB-003 du Canada.

Содержание Ironman Global Trainer M229











































Результаты поиска

Содержание Ironman Global Trainer M229

Отзывы:

Похожие инструкции для Ironman Global Trainer M229

Бренды по названию

Популярные бренды

Timex Ironman Global Trainer M229, Руководство пользователя

Результаты поиска

Содержание Ironman Global Trainer M229

Отзывы:

Похожие инструкции для Ironman Global Trainer M229

Бренды по названию

Популярные бренды