6
5
1
3
4
2
First please check all items in the
box, bike carrier, two wheel
stabilizing rubber straps, and 9mm
skewer.
Insert the 9mm skewer into the
hole located on the side of front
housing.
Secure the nut to the other side of
the 9mm skewer.
Before mounting bike carrier to the
roof bars, please prepare the six
knobs and three anti-skid plates.
At front side, make sure front roof
bar is between four screws
underneath front housing.
According to distance of rear cross
bar, move the two screws
accordingly so that rear roof bar is
within the two screws. (Caution: it is
required to have the minimum
distance between two roof bar at 40
cm / 15.75 inch which gives bike
carrier the best support)
Wheel tray
1
Front housing
2
Wheel holder
3
9mm skewer
4
Lever
5
Anti-skid plates
6
Knob
7
Wheel stabilzing rubber straps
8
1
2
3
4
5
6
7
8
