Timewave DSP-599zx, Руководство по эксплуатации

Страница: 38 / 106

2 – Installation
2-12 March 6, 1997
5. Press the left knob to select.
6. Rotate left knob until the chosen value appears on the bottom right of
the display
7. Press the left knob to select.
8. Rotate left knob until ,QSXW % appears on the bottom left of the
display
9. Press the left knob to select.
10. Rotate left knob until the chosen value appears on the bottom right of
the display
11. Press the left knob to accept choice and save. Press middle knob to
escape without saving changes.
12. Rotate left knob until your next function to change appears on the bot-
tom line of the display or press the middle knob to return to main set-
up menu.
Line Out Signal Level Setup
You should not need to change the factory default settings. If you need to
change the settings for some reason, do so with some caution. The range of
adjustment is -3.0 dBV to -24.0 dBV in 1.5 dBV steps. The factory default
is -3.0 dBV.
1. Press
[Shift+Mode]
twice to enter Setup mode.
2. Rotate left knob until ,QVWDOO appears on the bottom line of the
display
3. Press the left knob to select.
4. Rotate left knob until /LQH $ appears on the bottom left of the
display
5. Press the left knob to select.
6. Rotate left knob until the chosen value appears on the bottom right of
the display
7. Press the left knob to select.
Function
6
Shift
5
AGC
3
Bypass
Data
DSP-599zx
CW Voice
Mode
1
Random
4
Tone
2
599-075
Setup Test
Rcl/ Store
Spkr/ Chan
High Pass
Center Freq
Time