Timewave DSP-599zx, Руководство по эксплуатации

Страница: 34 / 106

2 – Installation
2-8 March 6, 1997
In this mode, you will hear the signal input on channel A on speaker/head-
phone A. Likewise, you hear the signal input on channel
B
on speaker/head-
phone B . When you are in this mode, you can hear both channels, but only
the active channel is being processed by the DSP. The other is just being
passed through. Selecting the active channel is accomplished by pressing
[Shift+Chan] on the front panel. You can also set the audio level of the al-
ternate channel with respect to the active channel within Setup - Install.
Line Output
You have the option to configure the line outputs differently from the speak-
er/headphone outputs. This is very convenient when using the internal mo-
dem or when using a multimode controller. You can have the speaker/
headphone outputs configured dual and the line output configured mono.
For example - this would direct the outputs form either selected input chan-
nel to the multimode controller. The factory default is mono as shown be-
low.
PTT
I/O
Data
I/O
Channel A
Input
Channel B
Input
DB-9
Connector
DIN
Connectors
Speaker A
Headphones A
Line Out A
599-063
Line Out B
Headphones B
Speaker B
Timewave DSP 599zx
PTT
I/O
Data
I/O
Channel A
Input
Channel B
Input
DB-9
Connector
DIN
Connectors
Speaker A
Headphones A
Line Out A
599-066
Line Out B
Headphones B
Speaker B
Timewave DSP 599zx