16
Recording
Recording can be started by moving the K210 toggle switch to
the ‘ON’ position. Moving the
switch to the ‘Off – USB2’ position will stop recording.
Recording can also be controlled by external switches which are used to connect pins 4 and 1
on the ‘Input’ connector (Alarm In 1) or pins 4 and 1 on the ‘USB2/Control’ connector (Alarm
In 2).
Recording on
- Defines which controls will start/st
op recording. If ‘Timer’ is selected then
the switch and alarm inputs will be disabled.
Rate
- Selects how many images per second the K210 will record at.
Resolution
– Selects the resolution that the K210 will record at.
Record Audio
- Selects whether audio recording is turned on/off.
Recording Duration
– Shows the amount of time the unit K210 will record for on its current
settings.
Priority Recording
–
The K210 can have a second style of recording. For example to record
for X images after the alarm, or for X s econds after the alarm. These are configured using the
pull down menus at the bottom. Another example described in the Configuration Utility text is
for normal recording to be at a lower ips, then record faster once the alarm is triggered.
Priority Recording always takes precedenc e over standard recording. Priority Recording is
more fully featured than Standard Recording, offering a Post Trigger time and also a
Single/Multiple Shot capability.
NOTE
Rate and Resolution will alter the
Recording Duration
.
