24
K220 PC Configuration Utility
The K220 Configuration Utility allows the user to change any of the K 220 settings and then
save them in its internal flash memory.
When the K220 Configuration Utility starts the user will see the following window.
This is an introductory screen showing the K220 connectors and controls and the main default
settings.
The configuration Utility is organised into a series of menu pages which can be accessed via
the tabs at the top of the utility window.
The three buttons at the bottom left of the window allow the user to restore the default K220
settings, save the new settings to the K220 internal memory or playback any .xba files
currently stored on the K220 by launching PCLink200
*
reviewing and archiving software.
These three buttons appear in the same location on every page of the utility .
The pages themselves are laid out so that the settings are on the left hand side of the utility
and a section of help text is on the right hand side.
*
PCLink200 is part of P CLink Suite and must be installed on the connected PC in order for it
to be launched from the K210/K220 Configuration Utility.
NOTE
‘Save Settings’ button must be pressed in order to change the settings
on the K220.
WARNI NG
‘Restore Defaults’ will take approx 30 seconds to implement the next
time the unit is set to record. The storage capacity lights will cycle
whilst thi s i s in progre ss. Recording will then commence.
