15
K210 PC Configuration Utility
The K210 Configuration Utility allows the user to change any of the K 210 settings and then
save them in its internal flash memory.
When the K210 Configuration Utility starts the user will see the following window.
This is an introductory screen showing the K210 connectors and controls and the main default
settings.
The configuration Utility is organised into a series of menu pages which can be accessed via
the tabs at the top of the utility window.
The three buttons at the bottom left of the window allow the user to restore the default K210
settings, save the new settings to the K210 internal memory or playback any .xba files
currently stored on the K210 by launching PCLink200
*
reviewing and archiving software.
These three buttons appear in the same location on every page of the utility.
The pages themselves are laid out so that the settings are on the left hand side of the utility
and a section of help text is on the right hand side.
NOTE
*PCLink200 i s part of P CLink Suite and must be installed on the
connected PC in order for it to be launched from the K210 Configuration
Utility.
NOTE
‘Save Settings’ button must be pressed in order to change the settings
on the K210.
WARNI NG
‘Restore Defaults’ will take approx 30 seconds to implement the next
time the unit is set to record. The storage capacity lights will cycle
whilst thi s i s in progre ss. Recording will then commence.
