Timeless Wings CASA C-101 AVIOJET, Руководство по монтажу

Страница: 5 / 30

5
INLET DUCT CONSTRUCTION and INSTALLATION
 Using a permanent marker pen, draw a 5mm wide border around all sides of
the 2 vac-formed PETG outer duct walls, as shown in the photograph below.
Using a sharp blade and a steel rule, trim to the border.
___________________________________________________________________

Place the trimmed duct outer walls onto the flat 0.5mm PETG sheet which
forms the duct inner walls, and trace around the perimeter of the DUCT
OUTER onto the DUCT INNER as shown.