Timeless Wings CASA C-101 AVIOJET, Руководство по монтажу

Страница: 21 / 30

21

Cut and join 1.5mm balsa sheet to make the lower centre-section sheeting (make
slightly over-size in front to allow for wrapping around LE). Mark out the position of
ribs, spar assembly and CENTRE-SECTION TRAILING EDGE (CS2).

Glue CENTRE-SECTION TRAILING EDGE (CS2) on TOP of the lower centre-section
sheeting (the total thickness at the trailing edge before shaping is thus 4.5mm).
Align the assemblies as shown below and glue in place, noting that glue is not
applied to the section of ribs in front of the spar at this stage.
 Glue CENTRE-SECTION FALSE LEADING EDGE (CS3) in place, then shape to match
curvature of ribs. Glue lower centre-section sheeting to forward ribs and CS3, and
when dry, trim flush.

Join the starboard wing spar to the centre-section using 5-minute epoxy. A small
spring clip is useful here to hold the parts in place while drying.