Timeless Wings CASA C-101 AVIOJET, Руководство по монтажу

Страница: 19 / 30

19

Glue FUSELAGE JOINERS FJ2 and FJ3 in their respective places as shown in the
photographs and on the plans.
 After completing the steps outlined above, the end result looks like this:

FIN FILLETS (FF) may be added now and shaped. Refer to photos of the full-size to
assist.

Glue TAILPIPE RING TP1 in position at the rear of F12, then glue F9B to the front of
the rear fuselage assembly. Note that the slots for the ply FUSELAGE JOINERS may
need to be enlarged slightly with a flat file to get a comfortable fit. Ensure that the
sleeve for the elevator pushrod is protruding through this former. Fit the 6.5mm
LOCATING DOWELS and glue into place. (See assembled and covered photo below
for details).