Timeguard SureTime STLB1000 Скачать руководство пользователя страница 10

9

10. Troubleshooting

Problem

•   The lamp stays ON  

at night.

•   The PIR keeps 

activating for no 
reason at random.

•   The PIR will not 

operate at all.

Solution

Cover the PIR lens with a thick cloth. If the light  
turns OFF, check the detection area for heat or a 
reflective source. If the light stays ON, check the wiring 
(See section 6. Connection Diagram).

Turn OFF at the isolation switch. Turn back ON again 
after 30 seconds. Leave for approximately 15 minutes. 

If the light activates, check for false activation from 
heat, wind or a reflective source.

Check that the power is switched ON at the power 
supply or isolation switch. 

Turn OFF the power to the unit and check the wiring 
connections. Check the lamp (if it’s changeable). If the 

lamp has failed, replace. Ensure the lamp is seated 

correctly in the lamp-holder. Please note that the unit 

will not detect through glass (e.g. in a glazed porch).

9. Manual Override Mode 

The light can be switched ON for longer time periods by use of the Manual 
Override Mode. This can be activated at night by using the isolation switch. 
•  Switch the isolation switch once (OFF/ON) within 1.5 seconds.
•  The unit will now illuminate continuously for approximately 6 hours  

or until it is switched back into Auto Mode.

•  To return to Auto Mode switch the isolation switch OFF and then  

back ON again within 1.5 seconds.

Содержание SureTime STLB1000













Отзывы: