9
review mode. If any changes are required to the
current set programmes press the ‘Change’ button
to start programming mode and then follow steps
from ‘Programme 1 ON time’.
7.6 Cancelling Programmes
To clear all programmes, press and hold down
the ‘Change’ and ‘Program’ buttons until the display
goes blank. Release both buttons and after a few
seconds you will be prompted to set the clock. Once
set you can re-enter your programme times.
7.7 Clearing Programmes
Any individual programme can be cancelled
by clearing its ON and OFF time. Follow the steps
as mentioned in section 7.5 ‘Program Review’ until
you reach the program you wish to cancel. Press the
‘Change’ button until the hour digits show --: and
press the program button to clear the programme.
7.8 Self-Cancelling Override
To change the output status from ON to OFF
or vice versa during normal operation press the
‘Change’ button. If the output status is OFF, it will
change to ON until the next programmed OFF time.
If the output is ON, it will change to OFF until the
next programmed ON time.
