Getting Started Guide
10
Fig. 6: Establishing a new connection for the radio using HyperTerminal
4. Using the screens shown in Fig. 7, select the correct COM port for your computer in the
Connect
Using
drop down. In the
COM1 Properties
screen, set
Bits per second
to 9600,
Flow control
to "None", and click
OK
.
Fig. 7: Designating the connection port (left) and specifying its settings (right).
5. Power on the radio. The terminal window should scroll as boot information from the radio is sent
to the serial port. When the terminal window displays "Embedded PAT has successfully
initialized", the radio has finished booting (Fig 8).
Proprietary Information: Do not disclose unless authorized under the the PulsON Developers Program Nondisclosure Agreement
