Timberland VR33, Инструкция по эксплуатации

Страница: 3 / 19

• Push the crown back to the normal position.
Push back to
Normal position
Recommend:
• When setting the minute hand, first advance it 4
to 5 minutes ahead of the desired time and then
turn it back to the exact minute.
How to use stopwatch functions
• The stopwatch can measure up to 29’59” in one-second increments.
• When the measurement reaches 30 minutes, the stopwatch automatically stops counting.
STOPWATCH
minute hand
START
STOP
RESTART
SPLIT
SPLIT RELEASE
RESET
STOPWATCH
second hand
A
B
Standard Measurement
B A A
Start Stop Reset
Note: Restart and stop of the stopwatch can be repeated by
pressing Button “A.”
Accumulated Elapsed Time Measurement
A A A
Start Stop Restart
B A
Stop Reset
Measurement of Two Competitors
A A B
Start Finish Time
of 1st
Competitor
2nd
Competitor
Finishes
B B
Finish Time
of 2nd
Competitor
Reset
Note: Measurement and release of split time can be repeated
by pressing Button “B.”
Split Time Measurement
B A B
Start Split Split
Release
B A
Stop Reset
• Pull the crown out to the 2nd click position.
Note: While the stopwatch is running or has
been stopped while running, if the crown is
pulled out to the 2nd click position, the
stopwatch will be automatically reset.
Pull out to
2nd position
* Before using the stopwatch, be sure to check that the crown is set at the normail position and that the
stopwatch hands are reset to the “0” position.
Note: If the stopwatch hands do not return to the “0” position when the stopwatch is reset to “0”, follow
the procedure in “Stopwatch hand position adjustment”.
• The stopwatch second hand is capable of timing 30 minutes. (60 seconds x 30 times)
• The stopwatch minute hand is capable of timing 30 minutes.
• Whether the stopwatch hands return to the “0” position in a clockwise rotation or in a counterclockwise
rotation is decided depending on the elapsed time the stopwatch has measured.
Stopwatch hand position adjustment
If the stopwatch hands are not in the “0” position, follow the procedures below to set them to the “0”
position.
• Push the crown back to the normal position.
Push back to
Normal position
• Press Button “A” or “B” to set the stopwatch hands
to the “0” position.
• The movements of the stopwatch minute hand and
stopwatch second hand are interlocked. To set the
stopwatch minute hand to the “0” position, continue
to move the stopwatch second hand until the
stopwatch minute hand reaches the “0” position.
Note: The stopwatch minute and second hand move
quickly if Button “A” or “B” is kept pressed.
Press A.
to move the
stopwatch hands
clockwise.
Press B.
to move the
stopwatch hands
counterclockwise.
5.
VR33
N 1 2
VR33
1.
VR33
N 1 2
3.
VR33
N 1 2
2.
B
A
VR33