Timberk Lotta FS1D V Series, Инструкция по эксплуатации

Страница: 29 / 64

IM2021
29
WARNING!
Water may drip from the drain pipe of the pressure relief device, this pipe must remain
unblocked. Water dripping cannot be avoided and must not be prevented as blocking
the valve can cause a rupture of the internal tank.
9. MAINTENANCE
Fig 5 Fig 6
1. Check the electric plug and socket as often as possible. Ensure proper electrical
contact and proper grounding. The plug and socket should not become excessively
hot.
2. If the water heater is not used for a long time, especially in regions with low air
temperatures (below 0
°C), water must be drained from the heater to prevent damage
to the product (to prevent water from freezing in the internal tank).
WARNING!
The manufacturer treats ay damage to the water heater done by water freezing in the
internal tank as a non-warranty case.
3. To ensure long-term reliable operation of the water heater and to maintain the
manuf
acturer’s warranty, the internal tank must be periodically cleaned, and deposits
must be removed from the heating element. Furthermore, the condition of the
magnesium anode must be checked (degree of breakdown) in order to have it replaced
with a new one in case of complete breakdown. Tank cleaning frequency depends on
the hardness of water in the area.
WARNING!
The manufacturer offers an extended warranty on individual components of the water
heater, provided that timely and proper maintenance is performed by specialists of the
Authorized Service Center (ASC), see the warranty card.
4. Preventive maintenance must be conducted in strict compliance with the operating
manual and safety precautions.