www.timberk.com • Electric metal ceramic fan heater
3
5. Store the unit in a cool or warm place. Do not store the unit in a damp room.
6. The plug must match the standard outlet and enter it without any effort. If the
plug doesn’t enter the outlet or enters it too tightly, turn the plug vertically 180°
and try again.
If you still cannot plug it then you need to call for an electrician to replace the
electric outlet. Never use the unit if the plug is not fully connected to the outlet.
7. If the power cord is damaged, it must be repaired by a skilled specialist. Never
try to repair it on your own. This may harm your health and affect the unit’s
guarantee maintenance.
8. To prevent injuries or damage of the property due to overheating, fire or
explosion:
•
do not place the heater nearby furniture and flammable objects.
•
do not dry clothes, towels or any other materials by means of the heater.
9. It is not recommended to use extension cords. If it is still necessary, try to use
the shortest possible extension cord with the wire strand section of the extension
cord not less than the wire strand section of the cord of the fan heater.
Do not use an extension cord for more than one electric appliance at a
time. Circuit overload can result in lighting malfunction, wiring melting and
fire.
10. Do not leave the operating unit for a long time without any supervision.
11. Place the unit only vertically on even and dry surfaces.
12. Bad contact between the power cord plug of the heater and an electric
outlet may result in overheating of the plug. If necessary, make sure to replace
old outlets.
13. Poor contact beween the pover cord plug of the heater and an electric outler
may result in overhaeting of the plug.
IMPORTANT!
If nessary, make sure to perlance old outlets.
Use ~220-240V, 50Hz electric mains to connect the
heater.
Make sure that electric applianses are not connected
to the same electric circuit (for example, an extension
cord) used for the heater. Circuit overload may result in
failures of lightng, melting of wiring and fire.
NOTE:
Apperance of smell/smoke is possible at first use. Do
not care, this means that an oll drop got oto the glowing
spiral during manufacturing. The drop will quickly
evanorate and no smoke/ smell will appear anymore.
3. WORKING PARAMETERS
Main features
1. Thanks to its small size and weight, the fan heater is convenient to be
placed in any room where additional air heating is required.
2. Durable and flameproof ceramic heating element provides quick and
effective air heating, doesn’t pollute the environment and doesn’t burn
oxygen.
3. Direct current electric motor with low noise.
4. A fuse and thermal limiter protect the fan heater from overheating.
14. The heater’s power cord must not be pressed down by furniture or be laid in
places where it can be easily stepped on.
15. Do not use the fan heater in rooms with increased humidity, nearby bath-
rooms, shower bath, pools, ponds, i.e. in places where it may be tipped over
into water, or water or water drops may contact it.
16. Do not place the heater on uneven or unstable surfaces. It is also forbidden
to mount the above an electric coutler, provided that the hot air flow vill contact it.
17. The heater is not designed for industrial application. It is used only as an
additional means of heating.
Make sure to take this information into consideration.
Содержание 82945
Страница 16: ...www timberk com ...
