Timberk 82945, Инструкция по эксплуатации

Страница: 5 / 16

www.timberk.com • Electric metal ceramic fan heater
5
7. CONTROL OF THE FAN HEATER
Unit operation
1. Plug the power cord.
2. Select the heating mode, comfortable for you, by setting the heating
power regulator to one of the indicated positions.
3. Set the control switch to maximum (II) for fast warm up of a room.
Once the room is comfortable, select a lower setting to reduce electrical
consumption and to prevent the room from becoming too warm. When the
room temperature will reach the desired level, turn the regulator in position
«off». To activate ventilation without heat, turn the switch to position «0». The
heater will start to work in the mode of ventilation.
Models
TFH T15NTX/TFH T15NTX.B
Switched off
Cold air
~ 1000 W
~ 1500 W
NOTE:
Apperance of smell/smoke is possible at first use. Do
not care, this means that an oll drop got oto the glowing
spiral during manufacturing. The drop will quickly
evanorate and no smoke/ smell will appear anymore.
9. DISPOSAL
Upon completion of service life, the fan heater must be disposed in
compliance with regulations, rules and by means, currently in force at a
disposal station. Such information on disposal of the fan heater you can
obtain from a representative of local authorities.
Fig. 2
Prior to cleaning and maintenance make sure that:
• the pover mode selector is set to «0» position (OFF) and the unit is de-
energized;
• disconnect the unit from electric mains by unpplugging the power cord
from an electric outlet;
8. MAINTENANCE
Models TFH T15NTX, TFH T15NTX.B
10. CIRCUIT DIAGRAMS
Recomendations on regular cleaning:
• disconnect the unit from electric mains;
• let the unit cool down, then wipe its case wiht a sof, slighly damp cloth.
It is not rrecomended to use detergents for washing, including materials
with abrasive elements.
Prevent damaging the unit by sharp objects (for example, by polishing
paper, etc.).
thermal
cut off
fuse
LOW HIGH
PCB
Motor
Power
Switch