TIM SmartVap D, Инструкция по эксплуатации

Страница: 17 / 132

2 Safety
SmartVap Vaporizer SW 1.n, Instructions for use (en-US) 17
2.1.12 Mechanical lock
If the mechanical lock of the installed vaporizer is opened and the vaporizer is not removed
from the anaesthesia device while the anaesthesia workstation is being used for ventilation
of a patient, leakages could result in an oxygen deficiency in the patient and thus place the
patient at risk.
Only open the mechanical lock of the vaporizer when the vaporizer is not being used
to sedate the patient.
Only open the mechanical lock of the vaporizer when you intend to remove the va-
porizer from the anaesthesia workstation.
2.1.13 Modifications
Modifications to the vaporizer could result in malfunctions and unforeseeable hazards. This
may result in risk to the patient and other persons or damage to the device.
Modifications to the vaporizer may only be performed by the manufacturer or by
technical personnel expressly authorized by the manufacturer.
2.1.14 Accessories
The vaporizer has been tested using accessories from the accessory list. If accessories not
included in the accessory list are used, this may cause malfunctions. In addition, the elec-
tromagnetic emissions of the vaporizer may be elevated or the interference immunity may
be reduced. This may result in risk to the patient and other persons or damage to the de-
vice.
Only use the accessories specified by the manufacturer.
2.1.15 Electromagnetic compatibility (EMC)
Medical electrical devices are subject to special precautions regarding electromagnetic
compatibility (EMC) and must be installed and put into operation in accordance with the
EMC information found in the manufacturer’s separate instructions “Guidelines and manu-
facturer's declaration concerning EMC”.
Please note:
The “Guidelines and manufacturer's declaration concerning EMC” can be
requested from the manufacturer.