4
WARNING BEFORE USE
To keep your cooker working properly, it is important to read this manual and strictly stick to
the instructions for use and handling.
For combustion use solid fuels such as wood and wood briquettes. It is forbidden putting
explosive devices and materials combustion chamber or the limited thermal furnace. It is
forbidden to keep flammable materials near the stove.
For proper combustion and regular operation of the stove, draft in the chimney should be 12-
17PA. If the draft is greater than 17Pa, the regulatory valve should be installed in the chimney.
Room where the cooker is positioned must be vented regularly because of the fresh air
needed for combustion.
Some parts of cooker heat up during operation and it takes appropriate precaution when
handling it. Do not allow children to handle and play near the cooker.
Only spare partes reccomended and allowed by the manufacturer should be installed on the
cooker. You must not make any changes on the cooker.
During the first firing there might show a lighter smoke, especially from the plate’s surface. It
is a common appearance that occurs due to combustion deposits on the plate’s
surface(corrosion protection, paint, dust, ....). The room where the cooker is should be vented
during the first firing.
It’s not reccomended connecting the cooker to the common chimney because it can
adversely affect the required draft.
Device that uses gas as fuel must not be connected to same chimney.
During firing, use protection gloves because the door handles get heated.
National and local regulations for the installation of the furnace must be respected.
In a case of non-copliance with instructions given in this manual, manufacturer does
not take any kind of responsability for caused damage.
