Page 9
www.kpa-solutions.com
The ambient temperature must always be between -5° C and +45° C. Keep away from direct insula-
tion (particularly in cars) and heaters.
The relative humidity must not exceed 50 % with an ambient temperature of 45° C.
This device must only be operated in an altitude between -0 and 000 m over NN.
The ambient contamination must never exceed level 1 and must not be conducting, only dry.
Never use the device during thunderstorms. Over voltage could destroy the device. Always discon-
nect the device during thunderstorms.
Operate the device only after having familiarized with its functions. Do not permit operation by per-
sons not qualified for operating the device. Most damages are the result of unprofessional operation!
Never use solvents or aggressive detergents in order to clean the device! Rather use a soft and
damp cloth.
Please use the original packaging if the device is to be transported.
Never remove the serial barcode from the device as this would make the guarantee void. Please con-
sider that unauthorized modifications on the speaker system are forbidden due to safety reasons!
If this device will be operated in any way different to the one described in this manual, the product
may suffer damages and the guarantee becomes void. Furthermore, any other operation may lead to
dangers like short- circuit, burns, electric shock, hearing loss etc.
5 DESCRIPTION
5.1 Features
Stereo add on amplifier module for the Kemper Profiling Amplifier
• Complete protection set against short-circuit, overheat, over voltage, overload
• Fan cooling
• Signal inputs via 6.3 mm mounting jacks
• Speaker outputs via lockable Speakon sockets
• Designed to fit into the open space at the KPAs back side
Please note:
operating an amplification system in public or industrial areas, a series of safety instruc-
tions have to be followed that this manual can only give in part. The operator must therefore inform
himself on the current safety instructions and consider them.
Do not shake the device. Avoid brute force when installing or operating the device.
When choosing the installation-spot, please make sure that the device is not exposed to extreme heat,
moisture or dust. There should not be any cables lying around. You endanger your own and the safety of
others!
This device must never be operated or stockpiled in surroundings where splash water, rain, moisture or
fog may harm the device.
Moisture or very high humidity can reduce the insulation and lead to mortal electrical shocks.
When using smoke machines, make sure that the device is never exposed to the direct smoke jet and is
installed in a distance of 0.5 meters between smoke machine and device.
