Page 18
www.kpa-solutions.com
7.2.3 Bridged mode operation
Only a single speaker is connected to bridged mode speaker output socket.
For this operation mode , please use the right channels signal input
The highest output power during stereo operation is achieved by connecting 8 ohms speakers. With 16
ohms speakers the output power will be slightly reduced.
Do not connenct speaker cabinets with an impedance < 8 ohms to the bridged mode speaker
out put socket!
Do not connect speaker cabinets to the speaker output sockets of the left and right channel
when the Camplifier is used in bridged mode!
scheme : bridged mode
English
CAMPLIFIER 290
4 Ω
/ 90W
Minimal
speaker impedance / power :
4 Ω
/ 90W
left
right /
both /
bridge
speaker
input
&
BlueAmps
Risk of electric shock!
Do not operate outside of KPA enclosure!
Equipment must be earthed.
Do not expose to rain or moisture!
www.kpa-solutions.com
8 Ω
/ 180W
Bridged
Mode
Signal Input
speaker
Connect speakers to this
socket
ONLY
for bridged
mode! Remove all other
speaker cables !
Power VAC / 50-60Hz / 210VA
Fuse
replace with same type only!
Serial #
