Page 17
www.kpa-solutions.com
7.2.2 Mono Operation (both stereo speakers operate with the same input signal)
Both speaker outputs will be driven by the same input signal. This input signal is fed to the RIGHT sig-
nal input socket (marked yellow at the connection scheme at the Camplifier).
The highest output power during stereo operation is achieved by connecting 4 ohms speakers. With 8
or 16 ohms speakers, the output power will be slightly reduced.
Scheme : Mono / both operation
English
CAMPLIFIER 290
4 Ω
/ 90W
Minimal
speaker impedance / power :
4 Ω
/ 90W
left
right /
both /
bridge
speaker
input
&
BlueAmps
Risk of electric shock!
Do not operate outside of KPA enclosure!
Equipment must be earthed.
Do not expose to rain or moisture!
www.kpa-solutions.com
8 Ω
/ 180W
Bridged
Mode
Signal Input
speaker
Connect speakers to this
socket
ONLY
for bridged
mode! Remove all other
speaker cables !
Power VAC / 50-60Hz / 210VA
Fuse
replace with same type only!
Serial #
