TILLYTEC MAXI UNI, Руководство пользователя

Страница: 2 / 8

User manual Maxi uni
-2-
General Care and Usage Instructions
•
The O-rings (sealing rings) should only be removed if they require replacing.
•
Lubricate the O-rings occasionally with a smear of silicone grease. Please do not apply to much grease. Do not use
silicone spray !
•
Regularly inspect the O-rings for damage or contamination, and change them if necessary. We recommend that you
carry spare O-rings.
•
The torches can be operated out of water for a short time, however they will become very hot very quickly so do not
leave unattended. Only operate until the torch head becomes warm.
•
After use rinse the torch thoroughly with fresh water whilst still attached to the umbilical and battery pack. Never use
any other cleaning agents.
•
Do not shine the torch into your eyes or the eyes of others as severe damage to the retina could result.
Advice on Using Battery Chargers
•
You can use (series) with the short tube:
- 3 x AAA alkaline batteries in a battery holder (optional *)
- 3 x AAA NiMh battery in a battery holder (optional *)
- 1 x 18650 accumulator with mit space holder (optional *)
- 1 x 26650 accumulator
•
You can use with the long tube (optional): Look on homepage www.TillyTec.de, under the buton „Infomation“.
•
For the cell 18650 and 26650 we recommend only to use batteries from type LiCoMn (lithium – cobalt –
mangan). Otherwise there is danger for explosion !
* available only at Tilly-direct
All mentioned batterys and suitable charger are available
at TILLYTEC.de under accessoires !