Picture in Picture
29
The Picture In Picture (PIP) function is not available from the
waterproof remote control, and can only be used with the full
function standard remote control shipped with the TileVision.
PIP allows the user to view two separate source inputs on the
TileVision at the same time. However the main input must be either
PC Digital or PC Analog – the PIP screen can be TUNER, SCART
or S-Video input.
Viewing the PIP picture
Press the PIP button. (Press the PIP button again, to turn PIP off).
Selecting the PIP picture mode
Press the MODE button to adjust the PIP picture mode. Each press
of the MODE button selects the 16:1, 9:1 and 4:1 mode. (Multi
picture mode is just available when the main picture is in AV mode).
Moving the PIP picture
Press the POSITION button to adjust the position of sub picture in
the PIP mode.
Switching the main and PIP picture
Press the SWAP button to switch the main and sub picture in PIP
mode.
Viewing the external source input
Press the INPUT button to select the input source of the sub picture
in PIP mode. Press the PR
UD
button to select the programme
desired in TV mode of sub picture.
