TECHNISONIC INDUSTRIES LIMITED
TDFM-9300 Installation Instructions
TiL 13RE471 Rev. D Issue 5
3
TYPE T Analog Band Codes
BAND
FREQUENCY RANGE
VHF
136 – 174 MHZ
UHF LO
380 – 470 MHZ
UHF HI
450 – 520 MHZ
700/800
764 – 870 MHZ
UHF
380 – 520 MHZ
VHF LO
30 – 50 MHZ
VHF AM
118 – 136 MHZ
UHF AM
225 – 400 MHZ
RF Band Coverage
Band numbers indicate Single band equipped modules and letters indicate Dual or Tri band
modules.
* Band codes are special order and are not standard configuration.
$ UHF Band specified covers both the UHF LO and UHF HI as one band. (380 – 520 MHz).
Project Number: P93XXX represents a 5 digit project number that identifies specific options that
are contained in each module and describes the full TDFM-9300 configuration.
All model variations are capable of supporting both 28 volt and 5 volt AC or DC backlighting. The
units are shipped set to operate on 28 volt backlighting. Equipment can be set to operate on 5 V
backlighting by using the software based configuration menu. See Section 2.17 Configuration
Menu in the TDFM-9300 Operating Instructions manual available at www.til.ca. Damage will not
occur if the incorrect voltage is applied.
ANALOG RF MODULES (T3x00)
1
VHF LO
4
VHF AM
5
UHF AM
Содержание TDFM-9300
Страница 2: ......