99RE255
TDFM-136 Installation & Operating Instructions
2-14
Technisonic Industries Ltd.
L3 Data Download
Download TDFM-136 Record files from a PC to the transceiver. The unit must be connected to a
PC running Windows 95, 98 or NT 4.0 and the TiL Radio Communications Software package. To
download record data the Transceiver must be set to receive data BEFORE the PC software is told
to send the data. The transceiver will wait for 25 seconds to receiver a valid record before timing
out. The radio will indicate which memory is being downloaded, and when the download is
complete.
The transceiver may have to swap memory space during the download, if this happens the activity
will be displayed on the front panel and the download will be completed after a SWAP and ERASE
cycle is finished.
L3 Display Channel Squelch Parameters
Display the Squelch parameters for the channel as long as the user HOLDS the ‘SQL’ key. The
data are displayed as follows:
‘t’ CTCSS Tone, ‘c’ DCS Code, ‘G’ P25 Talkgroup, ‘N’ P25 NAC.
R x t
6 7 . 0
c 1 3 1
G F F F F
N F 7 F
T x t 1 1 0 . 9
c 1 3 1
G 2 E 3 F
N 3 A 7
dàÜîëÑ>PKSL>ráÑ>aáÄççÑã>nÄëÄåÑìÑëí>bàíèãÄò
The data displayed on the TOP line are for RECEIVE and the data displayed on the BOTTOM line
are for TRANSMIT.
L3 – Command Level Up
This key selects the next HIGHER Command Level, the Command Level is indicated by a subscript
digit in the 4
th
character position on the lower row of the display. See section 2.1 above.
L3 – Command Level Down
This key selects the next LOWER Command Level, the command Level is indicated by a subscript
digit in the 4
th
character position on the lower row of the display. See section 2.1 above.
Unused Level 3 Command Keys
The following Level 3 command keys are currently un-implemented:
