TDFM-136 Installation & Operating Instructions
99RE255
Technisonic Industries Ltd.
2-5
L1 - Scroll Backwards through Available Memories
This command will scroll the Main Channel BACK, or down, through the programmed memories
until reaching the lowest memory programmed, it will then wrap around and restart from the top.
Once the user releases the button the displayed characteristics will be programmed. The scroll
speed will increase as the button is held.
L1 - Select Scan List and Start/Stop Scan
This command allows the user to select a Scan list to scan, and to start and stop the Scan
operation as follows:
íÑãÑÇì>ãàíì>ìé>íÇÄç>M>íìéè>íÇÄçL
ÄÇÇÑèì>ìáÑ>Ñçìëò>ÄçÉ>íìÄëì>íÇÄçL
ÄÅÄçÉéç>ìáÑ>ÇéååÄçÉ>ÄçÉ>ëÑìîëç>M>íìéè>íÇÄçL
Once scan has started the scan list digit remains to indicate that the unit is in SCAN mode. Also
note that all keypad keys are disabled except for:
íìéè>íÇÄç>ÄçÉ>ëÑìîëçL
ÉàíèãÄò>ÅëàÜáìçÑíí>ñéëäí>çéëåÄããòL
Front panel switch operation is modified as well: operation of
MN/GD
or
G1/G2
will terminate scan
and restore normal operation of keys and switches. The front panel
Squelch
button is disabled.
The
HI/LO
power switch is unaffected.
L1 - Scroll Forward through Available Memories
This command will scroll FORWARD, or up, through the programmed channels, scroll speed will
increase as the button is held and the scroll will wrap around and restart from the bottom. Once the
user releases the button the displayed characteristics will be programmed.
L1 - Edit Channel Operating Frequency
This command allows the user to edit the
Operating Frequency
of the selected channel; both
MAIN and GUARD channels may be edited. The channel to be edited is determined by the position
of the
MN/GD
switch and the
G1/G2
switch.
The frequency may be edited in one of three
edit modes
: Simplex (
Sx
), Receive only (
Rx
), or
Transmit (
Tx
) only. If simplex is chosen then the selected frequency will be applied to both Rx and
Tx operation.
