TigerStop TigerSaw Miter, Руководство пользователя

Страница: 23 / 52

17
1. Calibrate ( pg. 15 ) at a short position.
2. Move the pusher to a long position, place material against the pusher, and cycle the tool.
• Results for the scaling cycle are best for large distances between short and long positions.
3. Measure the long piece carefully. Divide the position on the screen by this measurement. The result is the
scale multiplier.
Scale
Scaling Cycle
Long Screen
Position
Long
Measurement
÷
=
Scale
Multiplier
Scale
Multiplier
Current
Scale
New
Scale
x
=
4. Adjust the scale (below). The new scale value should be the product of the old value and the scale
multiplier from step 3.
5. Repeat the scaling cycle, starting from step 1. Stop when the step 3 measurement matches the screen
position.
• The results will improve with every cycle.
• 3 cycles is typically sufficient.
6. Calibrate ( pg. 15 ) and find the end limits ( pg. 16 ) after setting the final scale.
1. Access the Setup menu ( pg. 14 ) and press repeatedly until the Scale screen is displayed.
2. Enter the password and press .
• The default password is the serial number.
3. Enter the new value and press to save.
• A higher scale causes the pusher to move farther for the same target.
4. Press the [Done] soft key to return to the Ready Screen.
5. Always calibrate (
pg. 15) immediately after changing the scale.
Adjusting the Scale
The TigerStop Menu
Scale is the setting that relates motor rotation to the distance traveled.
Adjust the scale when accuracy decreases with distance from the calibration point.
The fastest way to arrive at the correct scale is through the scaling cycle.