2
Installation and Setup
Controller Setup
On the TigerStop side of the installation, the controller has no specific setup requirements, but
the user must know the controller’s baud rate. The default setting is 115200, but this can be
checked or changed in the System Menu.
Access the System Menu
At the Ready Screen…
1. press [A] to select
Menu
2. Enter the password and press
.
3.
for Menu screen 2.
4. press [C] to access System Information
5.
to scroll through the screens of the
system menu until you get to Baud rate.
Check or change the baud rate
The current baud rate is displayed at this screen.
1. Press [B] or [C] to trigger password prompt.
Baud rate is a list parameter.
2. Enter the password, and
press [=].
3. Press [B] or [C] to scroll
through the baud rates.
4. Press [D] to save
selection and exit to the
Ready Screen.
