ESC Installation & User's Guide
16
Fig. 3 - The Com Setup button dialog box.
Fig. 4 - The Port Settings button dialog box.
Fig. 5 - The Add IP button dialog box.
Fig. 6 - The Disconnect button dialog box.
Open the Com Port Redirector and set up the virtual com ports.
1. Click the Com Setup button (Fig. 3).
2. Check the box next to the first two Com labels. This is usually Com3 and Com4, so the
remainder of this guide will assume it is. This enables port redirection for these com
numbers.
3. Select COM3 from the top-center “Redirect To” drop down menu (Fig. 1).
4. Click the Add
IP
button (Fig. 5).
5. Enter the IP address of the first ESC in the Host box (Fig. 5, pop up).
6. Enter 3001 in the
TCP
port box (11000 less than the number entered for Channel 1 in the
ESC setup).
7. Click OK.
8. Click Save.
9. Select COM4 from the top-center “Redirect To” drop down menu.
10. Click the Add IP button.
11. Enter the IP address of the second ESC in the Host box.
12. Enter 3002 in the TCP port box (11000 less than the number entered for Channel 2 in the
USD1100’s setup).
13. Click OK.
14. Click Save (Fig. 1) and Close.
15. Restart the computer.
