Tiger JD5085-5115M T4F, Монтаж и эксплуатация

Страница: 82 / 194

OPERATION
TRIPLE FLAIL Operation Section 3-22
© 2012 Alamo Group Inc.
OPERA
T
ION
1. With tractor engine running, place ON/OFF
switch(s) in "OFF" position and wait for
cuttershaft(s) to stop rotating.
2. Pull LIFT control lever rearward until lift frame
is as high as it will go.
3. Pull TILT control lever rearward until bracket on
unit is above travel lock bracket on lift cylinder
support. It takes some effort to pull TILT lever
from "FLOAT" position.
4. Push LIFT control lever forward enough to
lower unit slowly. Install the travel lock pin. It
must pass through bracket on unit as shown in
Figure Op-258_A.
5. Make certain that all control levers are in
"HOLD" position when transporting unit.
The mower’s center of gravity is raised making the
mower more prone to tipping when the side mowers
are in the raised position. Use extreme caution
when in the transport position and avoid uneven
terrain which could upset the mower.
When the side mowers are folded for transport, the center of gravity is raised and the
possibility of overturn is increased. Drive slowly and use extreme caution when turning on
hillsides. Overturning the Implement could cause the Implement to overturn the Tractor
and vice versa resulting in serious injury or even death. Never fold side mowers on a
hillside...the Implement or unit may overturn.
(STI-02_A)