Tiger JD5085-5115M T4F, Монтаж и эксплуатация

Страница: 108 / 194

MAINTENANCE
TRIPLE FLAIL Maintenance Section 4-6
©2016 Alamo Group Inc.
MAINTENANCE
TROUBLESHOOTING
SYMPTOMS CAUSE REMEDY
Vibration Loose Bolts Check all bolts and tighten to
recommended torque specs.
Cutter assembly Check for damaged blades, disc
Unbalanced or cuttershaft. Replace if needed.
Check for wire, rope, etc. entangled in the
cutter assembly
Mower will not lift Hydraulic Fluid Low Check and refill hydraulic fluid
Leaks in line Tighten or replace fittings and hoses
Faulty relief valve Check pressure in line. Line pressure
should be at least 2500 PSI
Kinked or blocked Clean or replace lines
Faulty cylinder Inspect, repair or replace cylinder
Oil temperature rises Low oil level Bring oil to proper level
above 200°F Kinked/ blocked hoses Inspect, repair or replace
Worn pump/ motor Disable and repair
Mower will not start Blown fuse Check fuse between mower switch
or run and ignition/replace
Ball valves closed Make sure valves are open
Low oil level Check hydraulic tank and fill
Line leak Check all fittings and lines,
re-tighten or replace
Electronic Without the tractor running, turn
solenoid faulty the mower switch to on. A low audible click
should be heard if the solenoid is engaging
the solenoid spool. If click is not heard, leave
switch in ON position and with a screwdriver
or other steel object, touch the small nut on
the end of the solenoid. If the metallic object
is not attracted to the nut, check the fuse and
wiring for an open circuit. If the object is
attracted but no “click” is heard, replace the
solenoid.