Tiger Serve Assembly Guide
Product Overview: Package Content
4
Package Content
The package you have received weighs approximately 32kg and has the following
dimensions:
It must contain the following:
•
1 x 2U, 19” rack-mount chassis with 1 or 2 server nodes installed.
•
1 x square-hole rack-mount rails kit:
•
2 x slide rails.
•
6 x screws for attaching the rails to the appliance.
•
4 x screws for attaching the rails and the appliance to the rack.
•
printed instructions for installing the rails.
•
2 x power cables.
•
1 x 1.80m UTP network cable.
•
1 x front panel bezel.
•
1 x system restore USB flash drive.
•
1 x CD with instructions.
Important:
If any of the components listed above is missing from your
shipment, please contact your reseller or Tiger Technology support
immediately.
Hardware Overview
Note:
The pictures used to illustrate the product in this manual may differ from the
Tiger Serve appliance you have received depending on the model and firmware
version.
Technical Characteristics
Description
Specification
Chassis dimensions
25.5" (D) × 17.2" (W) × 3.47" (H)
647.7 mm (D) x 437 mm (W) x 88 mm (H)
Net weight
(without the server nodes
installed)
approx. 13kg/29lbs
Gross weight
(with both server nodes
installed)
approx. 24kg/53lbs
Power Supply Unit
High-efficiency 800w (1+1) redundant power
supply W/ PFC, AC 100 ~ 240V Full Range,
50Hz ~ 60Hz
Temperature Range
Operating: 10
º
C ~ 40
º
C (50
º
F~104
º
F)
Non-operating: -40
º
C ~ 70
º
C (-40
º
F~158
º
F)
Humidity Range
Operating: 8%~90% non-condensing
Non-operating: 5% ~95% non-condensing
