Tiger Serve Assembly Guide
Post Installation Maintenance:
19
4.
Holding the levers, gently push the server node into the drawer, until you hear a
clicking sound.
Important:
Take care not to press any of the buttons, ports or adapters.
Tip:
To check that the server node is properly installed and makes full contact
with the enclosure, try to pull it out without unlocking the side tabs. If the
server node can be pulled out, repeat the steps for installing it from the beginning.
5.
Push the levers to the sides
6.
Proceed with cabling the server node (see “Cabling Tiger Serve” on page 11) and
powering it on (see “Powering On The Appliance” on page 10).
To uninstall a server node:
1.
Find the server node that you want to uninstall and turn it off (see “Powering On
The Appliance” on page 10).
Tip:
Press the UID button on the back of the node, to identify it physically on your
rack.
2.
Unplug its cables (FC, 10GbE and all available network cables).
