Tiger Serve Assembly Guide
Site Installation: Powering On The Appliance
10
To connect the appliance to the power supply:
1.
Plug the power cord in the power socket of the power supply module.
2.
Connect the power cord to the power outlet.
If the appliance is properly connected, the power module LED indicator will start
blinking in green. If there's problem with the module installation, its LED indicator
is red (blinking or solid) or there is no light at all.
Powering On The Appliance
Powering on the appliance means to power up at least one of the server nodes installed
in it. You can power up the other server node at any time, while the appliance is
operating.
To power on a server node:
1.
Press once the power button
at the back of the server node.
2.
Wait until the button (or the power status LED at the front) becomes solid green.
To turn off a server node:
Important:
It is advisable to always attempt to shut down the server node
through the web UI, before resorting to hard shut down.
Press continuously the power button
at the back of the server node, until its light
goes off.
