Tiffany HC98, Руководство пользователя

Страница: 6 / 10

STEP 4 - TOP OF THE HEAD
1. Using comb attachment 9mm or 12mm, cut hair on top of the head from back to front against the direction
in which the hair normally grows (see diagram 4). In some cases, this may require the reverse, or cutting
from front to back.
2. Comb attachments 3mm or 6mm are used to achieve a close crew cut or short cut.
3. For longer hair on top, use the comb provided and lift hair on the top of the head. Cut over the comb, with
the hair lifted or hold the hair between the fingers to lift it and cut it to desired length (see Diagram 5 and
6). Always work from the back of the head. You can cut the hair shorter gradually by reduction the space
between the comb/fingers, and the head. Comb out trimmed hair and check for uneven strands.
STEP 5 - FINISHING TOUCHES
1. Finally, use the taper lever without an attachment for close trimming around the base of the neck, the
sides of the neck and the ears.
2. To produce a clean straight line at the sideburns, reverse the hair clipper by turning the reverse side
uppermost (see diagram 7).
3. Press the clipper at right angles to the head, tips of the blades lightly touching the skin and work
downwards. This way you will obtain a clean cut as would be given by a razor.