Tiffany HC98, Руководство пользователя, Страница: 9 / 10

ADJUSTABLE LEVER
•
The lever is conveniently located near your thumb (if you are right-handed), so it can easily be adjusted
while the clipper is in your hand.
•
The lever adds versatility to your Hair Clipper by allowing you to gradually change the closeness of your
cut without an attachment comb.
•
When the lever is in the uppermost position, the blades will give you the closest cut and leave the hair
very short. Pushing the lever downward gradually increases the cutting length.
•
In its lowest position, the lever will leave the hair approximately the same length as a #1 comb.
•
The lever will also extend the use of your blades since a different cutting edge is used in each setting.
•
In addition, if extremely this hair has jammed the blades, it will help you to remove hair that has become
wedged between the two blades without removing the actual blades.
•
While the clipper is running, rapidly move the lever frpm “close cut” to “longer cut” a couple of times.
Doing this each time after you have finished using your Hair Clippers will help to keep the blades clear of
cut hair. If your clipper stops cutting and this does not help, your cutting blades are blunt. Replace them
with new blades.
CUSTOMER SERVICE
Australian Customer Service
GAF Control (Sales) Pty Ltd
P.O Box 19
Altona North Victoria 3025
Phone: 1300 659 489
Hours: 9am-5pm (EST) Mon-Fri
www.gafcontrol.com.au
*This product may vary slightly to the product illustrated due to ongoing product development.