8
10.4 Before Returning Any Unit for Service:
CAUTION
Fuses in the SHORT-STOP are designed to protect the
internal components. They are of a special fast-acting
semiconductor-protecting type, and MUST be replaced
with the same type of equal or lower current rating.
THE USE OF INCORRECT REPLACEMENT FUSES
WILL VOID THE WARRANTY, AND MAY RESULT
IN FURTHER DAMAGE TO THE EQUIPMENT.
If there is still a problem, internal trouble is indicated and
the unit should be returned to the factory for service.
BEFORE RETURNING ANY UNIT TO THE
FACTORY, be sure to make the observations and to
follow the requirements of Section 10 4
10.3
Motor Will Not Start
When SHORT-STOP is connected.
[ ] This is usually due to an open interlock (Terminals 3 &
4). NOTE: The INTERLOCK requires power be
applied to the Terminals 1 and 2 to operate, and cannot
be checked for continuity with an ohmmeter.
See Section 10.1-C.
(1)
Measure and document the voltage across Terminals
1, 2, 5 and 6.
(2)
Document the motor operating voltage, current and
horsepower.
(3)
REQUEST PERMISSION FOR THE RETURN,
specifying all the above, plus the type of application or
use, and the number of phases involved. Be sure to
supply the unit Serial Number, Model Number, and to
list all options provided.
(4)
PACK THE UNIT CAREFULLY, so that there will be
no further damage during shipment.
(5)
Be sure to include your name, address, telephone
number, and the address to which the repaired unit is to
be sent.
(6)
When returning any unit include a brief description of
the difficulty you are having, as well as any tests you
have made on it.
(7)
Collect shipments will not be accepted.
11.
LIMITED WARRANTY
Each SHORT-STOP is warranted by the factory for one year to be free from defects in materials and workmanship. Repairs
will be made at the factory, on products that are returned postpaid to the factory after permission or authorization for return
is granted.
The warranty is VOID if the unit has been tampered with without express permission: if fuses of an incorrect type or rating
have been used; if power has been incorrectly applied to the interlock Terminals 3 and 4, or for any other type of mis-use.
Aside from the above statement of warranty, TIE Industrial, its agents, employees, dealers and distributors assume NO
LIABILITY, AND SPECIFICALLY ASSUME NO LIABILITY FOR ANY CONSEQUENTIAL
DAMAGE due to malfunction, failure to function, improper application, or improper operation of these products.
No allowance can be made for removal or installation costs, machine downtime, transportation, etc.
THE USER ASSUMES FULL APPLICATIONS RESPONSIBILITY.
